Virtual Link - TP-Link T3700G-52TQ User Manual

Area Aggregation Table

Process:
Area ID:
Select:
IP Address:
Subnet Mask:
Cost:
Advertise:

10.9.7 Virtual Link

Choose the menu Routing→OSPF→Virtual Link to load the following page.
Configuration Procedure:
1) Select a process.
2) Configure the relevant parameters.
3) Click Apply.
Entry Description:
Virtual Link Creation

Process ID:
Transit Area ID:
Neighbor Router ID:
Virtual Link Table

Select:
Interface:
Select one OSPF Process to display its address range list.
Displays the area to which the address range belongs.
Select the desired item for configuration. It is multi-optional.
Displays the IP address of the address range.
Displays the subnet mask of the address range.
Displays the path cost to the address range and it can be
modified.
Displays the Advertise parameter and it can be modified.
Figure10-52 Virtual Link
Select the desired OSPF process for configuration.
The ID of the transit area. Virtual links can be configured
between any pair of area border routers having interfaces to
a common (non-backbone) area. Here the common area is
named Transit Area.
The router ID of the neighbor portion of a virtual link.
Select the desired item for configuration. It is multi-optional.
Displays the virtual interface. When you create a virtual link,
actually a virtual interface is created.
231