Basic Config - TP-Link T3700G-52TQ User Manual

Jetstream 52-port gigabit stackable l3 managed switch

Hide thumbs Also See for T3700G-52TQ:

Table of Contents

10.8.1 Basic Config

RIP (Routing Information Protocol) is a dynamic router protocol with Distance Vector

Algorithms. You could configure the protocol below to active as you like.

Choose the menu Routing→RIP→Basic Config to load the following page.

The following entries are displayed on this screen:

RIP Protocol:

Figure 10-27 RIP Basic Config

Choose to enable or disable the RIP function. By default it is