Neighbor Info - TP-Link T3700G-52TQ User Manual

Device Type:
Application Type:
Unknown Policy
Flag:
VLAN tagged:
Media Policy VLAN
ID:
Media Policy Layer
2 Priority:
Media Policy DSCP:
Power Source:
Power Priority:
Available Power
Value:

16.4.4 Neighbor Info

On this page you can get the LLDP-MED information of the neighbors.
Choose the menu LLDP → LLDP-MED → Neighbor Info to load the following page.
Specify the auto refresh rate.
Application Type indicates the primary function of the
applications defined for the network policy.
Displays whether the local device will explicitly advertise the
policy required by the device but currently unknown.
Indicates the VLAN type the specified application type is using,
'tagged' or 'untagged'.
Displays the application (eg. Voice VLAN) VLAN identifier (VID)
for the port.
Displays the Layer 2 priority to be used for the specified
application type.
Displays the DSCP value to be used to provide Diffserv node
behavior for the specified application type as defined in IETF
RFC 2474.
Displays the power source being utilized by a PSE or PD device.
Power Priority represents the priority of the PD type device to
the power being supplied by the PSE type device, or the power
priority associated with the PSE type device's port that is
sourcing the power via MDI.
Indicates the total power in watts required by a PD device from a
PSE device, or the total power a PSE device is capable of
sourcing over a maximum length cable based on its current
configuration.
399