Application Example For Proxy Arp - TP-Link T3700G-28TQ User Manual
Jetstream 28-port gigabit stackable l3 managed switch
Hide thumbs
Also See for T3700G-28TQ:
- User manual (430 pages) ,
- Cli reference manual (424 pages) ,
- Reference manual (408 pages)
Table of Contents
Advertisement
Search Default
Route:
Proxy ARP Information
Select:
IP Address:
Subnet Mask:
Interface:
Interface Name:
Status:
10.6.2 Application Example for Proxy ARP
Network Requirements
1.
PC A and PC B are in the same network segment but belong to VLAN2 and VLAN3
respectively.
2.
The IP address of PC A is 192.168.2.10/16 and the IP address of PC B is 192.168.3.11/16.
3.
PC A and PC B can interconnect with each other by using Proxy ARP function.
Network Diagram
Configuration Procedure
Configure the Switch
Step Operation
1
Create VLAN
2
Create VLAN
Interface 2
3
Create VLAN
Interface 3
If enabled, default route is included when searching arp
proxy.
Select the desired item for configuration. It is multi-optional.
Displays the interface's IP address.
Displays the interface's subnet mask.
Displays the interface.
Displays the name of the interface.
Enable/Disable the items selected.
Description
Required. On page VLAN→802.1Q VLAN→VLAN Config, create
VLAN 2 and VLAN 3, and configure their ports.
Required. On Routing→Interface→Interface Config page, create
VLAN Interface 2 with its IP address as 192.168.2.1, subnet mask as
255.255.255.0 and interface name as VLAN2.
Required. On Routing→Interface→Interface Config page, create
VLAN Interface 3 with its IP address as 192.168.3.1, subnet mask as
255.255.255.0 and interface name as VLAN3.
164
Advertisement
Table of Contents
