TP-Link T3700G-52TQ User Manual page 338

Configuration Procedure:
1) Select an ACL ID from the drop-down list, enter a Rule ID, then specify the operation of the
rule.
2) Select and define the rule's packet-matching criteria.
Entry Description:
ACL ID:
Rule ID:
Operation:
S-MAC:
D-MAC:
MASK:
VLAN ID:
EtherType:
User Priority:
Time-Range:
Create MAC Rule
Figure 13-6
Select the desired MAC ACL for configuration.
Enter the rule ID.
Select the operation for the switch to process packets which match
the rules.
Permit: Forward packets.

Deny: Discard Packets.

Enter the source MAC address contained in the rule.
Enter the destination MAC address contained in the rule.
Enter MAC address mask. If it is set to 1, it must strictly match the
address.
Enter the VLAN ID contained in the rule.
Enter EtherType contained in the rule.
Select the user priority contained in the rule for the tagged packets
to match.
Select the time-range for the rule to take effect.
325