Snmp Config; Global Config - TP-Link T3700G-52TQ User Manual

SNMP Management Station by configuring its view type (included/excluded). The OID of
managed object can be found on the SNMP client program running on the SNMP Management
Station.
2. Create SNMP Group
After creating the SNMP View, it's required to create an SNMP Group. The Group Name,
Security Model and Security Level compose the identifier of the SNMP Group. The Groups with
these three items the same are considered to be the same. You can configure SNMP Group to
control the network access by providing the users in various groups with different
management rights via the Read View, Write View and Notify View.
3. Create SNMP User
The User configured in an SNMP Group can manage the switch via the client program on
management station. The specified User Name and the Auth/Privacy Password are used for
SNMP Management Station to access the SNMP Agent, functioning as the password.
SNMP module is used to configure the SNMP function of the switch, including three submenus:
SNMP Config, Notification and RMON.

15.1 SNMP Config

The SNMP Config can be implemented on the Global Config, SNMP View, SNMP Group,
SNMP User and SNMP Community pages.

15.1.1 Global Config

Choose the menu SNMP → SNMP Config → Global Config to load the following page.
Configuration Procedure:
Configure the local engine ID and remote engine ID.
Entry Description:
Local Engine

Local Engine ID:
Figure 15-3 Global Config
Specify the Switch's Engine ID for the remote clients. The
Engine ID is a unique alphanumeric string used to identify the
SNMP engine on the Switch.
367