TP-Link T3700G-52TQ User Manual page 138

Network Diagram

Configuration Procedure

Configure Switch A:

Step Operation
1 Configure ports
2 Enable MSTP function
3 Configure the
name and the revision of
MST region
4 Configure
VLAN-Instance mapping
table of the MST region
Configure Switch B:

Step Operation
1 Configure ports
Description
On VLAN→802.1Q VLAN page, configure the link type of the
related ports
VLAN101-VLAN106. The detailed instructions can be found
in the section
On Spanning Tree→STP Config→STP Config page, enable
STP function and select MSTP version.
On Spanning Tree→Port Config→Port Config page, enable
MSTP function for the port.
region On Spanning Tree→MSTP Instance→Region Config page,
configure the region as TP-Link and keep the default revision
setting.
On Spanning Tree→MSTP Instance→Instance Config page,
configure VLAN-Instance mapping table. Map VLAN 101,
103 and 105 to Instance 1; map VLAN 102, 104 and 106 to
Instance 2.
Description
On VLAN→802.1Q VLAN page, configure the link type of the
related ports
VLAN101-VLAN106. The detailed instructions can be found
in the section
125
as Trunk, and
802.1Q VLAN.
as Trunk, and
802.1Q VLAN.
add the ports
add the ports
to
to