Interface - TP-Link T3700G-52TQ User Manual

Entry Description:
Network Config

Process ID:
IP Address:
Wildcard Mask:
Area ID:
Network Table

Process:
Select:
IP Address:
Wildcard Mask:
Area ID:

10.9.4 Interface

Choose the menu Routing→OSPF→Interface to load the following page.
Entry Description:
Interface Table

Select:
Interface:
IP Address/Mask:
Process:
Area ID:
Router Priority:
Select the desired OSPF process for configuration.
The IP address of the network.
The wildcard mask of the network. Normal subnet mask is
also supported.
The 32 bit unsigned integer that uniquely identifies the area
to which a router interface connects. If you assign an Area ID
which does not exist, the area will be created with default
values. It can be in decimal format or dotted decimal format.
Select one OSPF Process to display its network list.
Select the desired item for configuration. It is multi-optional.
Displays the IP address of the network.
Displays the wildcard mask of the network.
Displays the area to which the network belongs.
Figure10-48 OSPF Interface
Select the desired item for configuration. It is multi-optional.
The interface for which data is to be displayed or configured.
The IP address and subnet mask of the interface.
The process to which the interface belongs.
The area to which a router interface connects.
The router priority for the selected interface. The priority of
an interface is specified as an integer from 0 to 255. A value
of '0' indicates that the router is not eligible to become the
designated router on this network. The default is 1.
223