The following entries are displayed on this screen:
Gobal Config
IPv6:
Interface:
Link-local Address Config
Config Mode:
Link-local Address:
Figure 4-7 System IPv6
Enable or disable IPv6 function globally on the switch.
Choose the interface ID to set IPv6 function. You can set
interface type as VLAN Port or Routed Port.
Select the link-local address configuration mode.
Manual: When this option is selected, you should assign
a link-local address manually.
Auto: When this option is selected, the switch will
generate a link-local address automatically.
Enter a link-local address.
20