Routing Table - TP-Link T3700G-52TQ User Manual

IP Address Mode:
IP Address:
Secondary IP:
Interface Status:
Admin Status:
Interface Setting Detail Information

Displays the detailed setting information of the interface.

10.2 Routing Table

This page displays the routing information summary generated by different routing protocols.
Choose the menu Routing → Routing Table → Routing Table to load the following page.
Routing Information Summary

Protocol
Destination Network:
Next Hop:
Distance:
Metric:
Interface name:
Displays the IP address allocation mode.
None: without ip.
Static: setup manually.
DHCP: allocated through DHCP.
Displays the IP address and subnet mask of the interface.
Displays the secondary IP address and subnet mask of the
interface.
Displays the interface current working status, which is up when
Admin Status is enable, line protocol is up and IP address is set.
Displays the Admin status. Choose 'Disable' to disable the
interface's Layer 3 capabilities.
Figure 10-4 Routing Table
Displays the protocol of the route.
Displays the destination and subnet of the route.
Displays the IP address to which the packet should be sent next.
Displays the administrative distance which is a rating of the
trustworthiness of a routing information. A higher value means a
lower trust rating. When more than one routing protocols have
routes to the same destination, only the route which has the
smallest distance will be recorded in the IP routing table.
Displays the metric of the route.
Displays the description of the egress interface.
166