trusted certificate authority" or "Certificate Errors". Please add this certificate to trusted
certificates or continue to this website.
The switch also supports HTTPS connection for IPv6. After configuring an IPv6 address (for
example, 3001::1) for the switch, you can log on to the switch's Web management page via
https://[3001::1].
On this page you can configure the HTTPS function.
Choose the menu System → Access Security → HTTPS Config to load the following page.
The following entries are displayed on this screen
Global Config
HTTPS:
Figure 4-20 HTTPS Config
:
Enable or disable the HTTPS function on the switch.
33