TP-Link T3700G-52TQ User Manual page 369

Configuration Procedure:
Select one or more ports and configure the relevant parameters. Then click Apply.
Entry Description:
UNIT:
Select:
Port:
Status:
Guest VLAN:
Port Control:
Port Method:
Max Request:
Figure 14-23 Port Config
Select the unit ID of the desired member in the stack.
Select your desired port for configuration. It is multi-optional.
Displays the port number.
Select Enable/Disable the 802.1X authentication feature for the
port.
Specify the VLAN ID needed to enable the Guest VLAN function,
ranging from 0 to 4093. 0 indicates that the Guest VLAN function
is disabled. The supplicants in the Guest VLAN can access the
specified network sources.
Specify the Control Mode for the port.
Auto: In this mode, the port will normally work only after
•
passing the 802.1X Authentication.
Force-Authorized: In this mode, the port can work normally
•
without passing the 802.1X Authentication.
Force-Unauthorized: In this mode, the port is forbidden
•
working for its fixed unauthorized status.
Specify the Control Type for the port.
MAC Based: Any client connected to the port should pass
•
the 802.1X Authentication for access.
Port Based: All the clients connected to the port can access
•
the network on the condition that any one of the clients has
passed the 802.1X Authentication.
Specify the maximum number of attempts to send the
authentication packet. It ranges from 1 to 10 times and the
default is 10 times.
356