TP-Link T3700G-52TQ User Manual page 383

Security Model:
Security Level:
Read View:
Write View:
Notify View:
Group Table

Select:
Group Name:
Security Model:
Security Level:
Read View:
Write View:
Notify View:
These three items of the Users in one group should be the
same.
Select the Security Model for the SNMP Group.
v1: SNMPv1 is defined for the group. In this model, the
•
Community Name is used for authentication. SNMP v1 can
be configured on the SNMP Community page directly.
v2c: SNMPv2c is defined for the group. In this model, the
•
Community Name is used for authentication. SNMP v2c can
be configured on the SNMP Community page directly.
v3: SNMPv3 is defined for the group. In this model, the USM
•
mechanism is used for authentication. If SNMPv3 is
enabled, the
configuration.
Select the Security Level for the SNMP v3 Group.
noAuthNoPriv: No authentication and no privacy security
•
level is used.
authNoPriv: Only the authentication security level is used.
•
authPriv: Both the authentication and the privacy security
•
levels are used.
Select the View to be the Read View. The management access
is restricted to read-only, and changes cannot be made to the
assigned SNMP View.
Select the View to be the Write View. The management access
is writing only and changes can be made to the assigned SNMP
View. The View defined both as the Read View and the Write
View can be read and modified.
Select the View to be the Notify View. The management station
can receive
notification
generated by the switch's SNMP agent.
Select the desired entry to delete the corresponding group.
multi-optional.
Displays the Group Name here.
Displays the Security Model of the group.
Displays the Security Level of the group.
Displays the Read View name in the entry.
Displays the Write View name in the entry.
Displays the Notify View name in the entry.
370
Security Level field
messages of the assigned SNMP view
is enabled for
It's