System Tools; Boot Config - TP-Link T3700G-52TQ User Manual

Password:
Confirm Password:
User Table

Select:
User ID, User Name
and Access Level:
Operation:

4.3 System Tools

The System Tools function, allowing you to manage the configuration file of the switch, can be
implemented on Boot Config, Config Restore, Config Backup, Firmware Upgrade, System
Reboot and System Reset pages.

4.3.1 Boot Config

On this page you can configure the boot file and the configuration file of the switch. When the
switch is powered on, it will start up with the startup image. If the startup fails, the switch will try
to start up with the backup image. If this startup fails too, the switch will changes to bootutil
state, in which circumstance the switch's Web interface is unavailable and you can enter into
the bootutil menu of the switch through the console connection.
When the startup process is finished, the switch will read the startup-config file. If it fails, the
switch will try to read the backup-config file. If it fails too, the switch will be restored to factory
settings.
Choose the menu System → System Tools → Boot Config to load the following page.
Type a password for users' login.
Retype the password.
Select the desired entry to delete the corresponding user
information. It is multi-optional. The current user information
cannot be deleted.
Displays the current user ID, user name and access level.
Click the Edit button of the desired entry, and you can edit the
corresponding user information. After modifying the settings,
please click the Apply button to make the modification
effective.
26