TP-Link T3700G-52TQ User Manual page 151

The following entries are displayed on this screen:
IGMP Snooping Querier Config

Querier Mode:
Query VLAN
Address:
IGMP Version:
Query Interval:
Expiry Interval:
IGMP Snooping Querier Table

Select:
VLAN ID:
Query Mode:
Election Participate:
Querier VLAN
Address:
Operational State:
Last Querier
Address:
Operational
Version:
Operational Max
Response Time:
Last Querier Address Table

VLAN ID:
Last Querier
Address:
IGMP Version:
Enter the Query mode which for the IGMP snooping querier on
the device. When enabled, the IGMP snooping querier sends out
periodic IGMP queries that trigger IGMP report messages from
the switches that want to receive IP multicast traffic. The IGMP
snooping feature listens to these IGMP reports to establish
appropriate forwarding.
Enter the General Query Message source IP address.
Enter the IGMP version used in periodic IGMP queries.
Enter the time interval of sending a general query frame by IGMP
Snooping Querier.
Enter the Expiry Interval which is amount of time the device
remains in non-querier mode after it has discovered that there is
a multicast querier in the network.
Select the desired entry. It is multi-optional.
Displays the ID of the VLAN that enables IGMP Snooping
Querier.
Displays the Querier Mode of VLAN.
Displays the Election Participate of VLAN.
Displays the General Query Message source IP address.
Displays the Operational State.
Displays the Last Querier Address.
Displays the Operational Version.
Displays the value of Operational Max Response Time.
Displays the VLAN ID.
Displays the Last Querier Address.
Displays the Last Querier Version.
138