Application Example For 802.1Q Vlan - TP-Link TL-SG3210 User Manual

The following entries are displayed on this screen:
Create Protocol Template

Protocol Name:
Ether Type:
Frame Type:
Protocol Template Table

Select:
ID
Protocol Name:
Ether Type:
Frame Type
Note:
The Protocol Template bound to VLAN cannot be deleted.
Configuration Procedure:
Step Operation
1 Set the link type for port.
2 Create VLAN.
3 Create Protocol Template.
4 Create Protocol VLAN.
5 Modify/View VLAN.
6 Delete VLAN.

6.4 Application Example for 802.1Q VLAN

Network Requirements

Switch A is connecting to PC A and Server B;

Give a name for the Protocol Template.
Enter the Ethernet protocol type field in the protocol template.
Select a Frame Type for the Protocol Template.
Select the desired entry. It is multi-optional.
Displays the index of the protocol template.
Displays the name of the protocol template.
Displays the Ethernet protocol type field in the protocol template.
Displays the Frame type field for the protocol template.
Description
Required. On the VLAN →802.1Q VLAN →Port Config
page, set the link type for the port based on its connected
device.
Required. On the VLAN →802.1Q VLAN →VLAN Config
page, click the Create button to create a VLAN. Enter the
VLAN ID and the description for the VLAN. Meanwhile,
specify its member ports.
Required. On the VLAN →Protocol VLAN →Protocol
Template page, create the Protocol Template before
configuring Protocol VLAN.
Required. On the VLAN →Protocol VLAN →Protocol
VLAN page, select the protocol type and enter the VLAN ID
to create a Protocol VLAN.
Optional. On the VLAN →Protocol VLAN →Protocol
VLAN page, click the Edit button to modify/view the
information of the corresponding VLAN.
Optional. On the VLAN →Protocol VLAN →Protocol
VLAN page, select the desired entry to delete the
corresponding VLAN by clicking the Delete button.
79