Vlan Config - TP-Link T3700G-52TQ User Manual
Jetstream 52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for T3700G-52TQ:
- Cli reference manual (493 pages) ,
- Installation manual (37 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
Max Response Time:
Profile ID:
LAG:
9.2.3 VLAN Config
Multicast groups established by MLD Snooping are based on VLANs. On this page you can
configure different MLD parameters for different VLANs.
Choose the menu Multicast→MLD Snooping→VLAN Config to load the following page.
The following entries are displayed on this screen:
VLAN Config
VLAN ID:
Fast Leave:
port time. The switch will no longer consider this port as a
router port and delete it from the router port table. The valid
values are from 60 to 600 seconds.
Enter the host's maximum response time to general query
messages in a range of 1 to 25 seconds.
Enter the profile ID you create to bind the profile to the port.
One port can only be bound to one profile.
Displays the LAG number.
Figure 9-12 VLAN Config
Enter the VLAN ID to enable MLD Snooping for the desired
VLAN.
Enable or disable Fast Leave feature in this VLAN. If Fast Leave
is enabled, the switch will immediately remove this port from
the multicast group upon receiving MLD leave messages.
145
Advertisement
Table of Contents
