Multicast Group Table - TP-Link T3700G-52TQ User Manual
Jetstream 52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for T3700G-52TQ:
- Cli reference manual (493 pages) ,
- Installation manual (37 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
Routed Port:
Interface State
Interface:
Operational Status:
Querier State:
IP Address:
Querier IP:
Querier Up Time:
Querier Expiry
Time:
Wrong Version
Queries Received:
Number of Joins
Received:
Number of Groups:
11.2.4 Multicast Group Table
On this page you can view the information of the multicast groups already on the switch.
Multicast IP addresses range from 224.0.0.1 to 239.255.255.255. The range for receivers to
join is from 224.0.1.0 to 239.255.255.255.
Choose the menu Multicast Routing→IGMP→Multicast Group Table to load the following
page.
Enter the routed port the desired entry must carry.
The interface for which data is to be displayed or configured.
The operational state of IGMP on the selected interface.
Indicates whether the selected interface is in querier or
non-querier mode.
The IP address of the selected interface.
The address of the IGMP querier on the IP subnet to which
the selected interface is attached.
Indicates whether the selected interface is in querier or
non-querier mode.
The time in seconds remaining before the other querier
present timer expires. If the local system is the querier, this
will be zero.
The current number of dynamic groups for the selected
interface.
The number of times a group membership has been added
on the selected interface; that is, the number of times an
entry for this interface has been added to the cache table.
This gives an indication of the amount of IGMP activity on
the interface.
The current number of entries for the selected interface in
the cache table.
Figure 11-8 Multicast Group Table
263
Advertisement
Table of Contents
