Service Config - TP-Link T3700G-52TQ User Manual

Police Two Rate:
Redirect Interface:
Note:
To complete QoS function configuration, you have to go to the Schedule Mode page to select
a schedule mode after the configuration is finished on this page.

12.2.6 Service Config

Choose the menu QoS→DiffServ→Service Config to load the following page.
Configuration Procedure:
Add DiffServ policies to interfaces or remove policies from interfaces.
Entry Description:
DiffServ Service Config

Policy:
Type:
Interface:
DiffServ Service Table

Interface:
Type:
Select this option to enable the two-rate traffic policing style for
the policy-class. The two-rate form of the police attribute uses
two data rates and two burst sizes. Only the smaller of the two
data rates is intended to be guaranteed.
Select this option to force a classified traffic stream to the
specified egress port (physical port or LAG). Use the Interface
field to select the interface to which traffic is redirected.
Figure 12-9 DSCP Priority
Select a policy.
Displays the traffic flow direction to which the policy is applied.
Select one or more interfaces bound to the policy.
Displays the interfaces that have an associated policy.
Displays the traffic flow direction to which the policy is applied.
312