TP-Link T3700G-52TQ User Manual page 410

Configuration Procedure:
1) Select your desired port and enable LLDP-MED. Then click Apply to make the settings
effective.
2) Click Detail to configure the included TLVs in outgoing LLDPDU on the following page.
Entry Description:
UNIT:
Select:
LLDP-MED Status:
Figure 16-7 LLDP-MED Port Configuration
Figure 16-8 Configure TLVs of LLDP-MED Port
Select the unit ID of the desired member in the stack.
Select the desired port to configure.
Configure the port's LLDP-MED status:
Enable: Enable the port's LLDP-MED status, and the port's
•
Admin Status will be changed to Tx&Rx.
Disable: Disable the port's LLDP-MED status.
•
397