User Management - TP-Link T3700G-52TQ User Manual

The following entries are displayed on this screen:
IPv6 Configuration

IPv6:
IPv6 Protocol:
DHCPv6 Client DUID:
AutoConfig:
Add a IPv6 Address

Address Format:
IPV6 Address:
IPv6 Gateway Configuration

IPv6 Gateway:
IPv6 Gateway
Address:
IPv6 Address List

Select:
IPv6 Address Type:
IPv6 Prefix:
Prefix Length:

4.2 User Management

User Management functions to configure the user name and password for users to log on to
the Web management page with a certain access level so as to protect the settings of the
switch from being randomly changed.
Enable or disable IPv6 function globally on the management
port.
Specify IPv6 network information allocate mode of the
management port.
None: Setup manually.

DHCP: Allocated through DHCP.

The client identifier used by the DHCPv6 client (if enabled)
when sending messages to the DHCPv6 server.
Choose whether to allow to enable the IPv6 stateless
address autoconfiguration mode via the RA message on the
management port.
You can select the IPv6 address format according to your
requirements.
EUI-64: Indicates that you only need to specify an

address prefix, and then the system will create a IPv6
address automatically.
Not EUI-64: Indicates that you have to specify an intact

IPv6 address.
When selecting the mode of EUI-64, please input the address
prefix here, otherwise, please input an intact IPv6 address
here.
Choose whether to set the IPv6 Gateway Address.
Please input the IPv6 gateway address here.
Select the interfaces to modify or delete.
Displays IPv6 Address type: Link Local, Global or Router.
Displays the IPv6 prefix.
Displays the prefix length of IPv6 Address.
24