Snmp Group - TP-Link T3700G-52TQ User Manual

MIB Object ID:
View Type:
View Table

Select:
View Name:
View Type:
MIB Object ID:

15.1.3 SNMP Group

On this page, you can configure SNMP Group to control the network access by providing the
users in various groups with different management rights via the Read View, Write View and
Notify View.
Choose the menu SNMP → SNMP Config → SNMP Group to load the following page.
Configuration Procedure:
1) Set the group name and security model. If you choose SNMPv3 as the security model, you
need to further configure security level.
2) Set the read, write and notify view of the SNMP Group. Click Create.
Entry Description:
Group Config

Group Name:
Enter the Object Identifier (OID) for the entry of view.
Select the type for the view entry.
Include: The view entry can be managed by the SNMP
•
management station.
Exclude: The view entry cannot be managed by the
•
SNMP management station.
Select the desired entry to delete the corresponding view.
All the entries of a view will be deleted together.
Displays the name of the view entry.
Displays the type of the view entry.
Displays the OID of the vew entry.
Figure15-5 SNMP Group
Enter the SNMP Group name. The Group Name, Security Model
and Security Level compose the identifier of the SNMP Group.
369