Enabling CC-SG Integration
Enable CC-SG integration in the Administration settings.
When the feature is enabled or disabled, you must logout of Dominion
User Station, and then log back in so that the authentication can take
effect.
If you have local users and CC-SG users, make sure "Allow access for
local users" is checked. This setting adds a local users option to the
login page, so that all of your users can access. Using a local login
disables the CC-SG integration access for the current session. Local
users will not see any CC-SG devices.
Note: If the CC-SG is in cluster mode and the primary CC-SG goes down,
the Dominion User Station will not try to connect to the backup CC-SG.
To enable CC-SG integration:
1. If not displayed, launch the User Station Configuration window. See
User Station Configuration
2. Click Administration > CC-SG.
3. In the Edit CC-SG Settings page, select the options for your CC-SG
integration:
a. Enable CC-SG Integration: select the checkbox, then add the
CC-SG IP Address/Hostname.
Chapter 9: Administration Features
(on page 27).
135