Raritan Dominion KX III User Manual page 132

Chapter 9: Administration Features
122
Setting Description
Configurable when "Type" is set to
Domain
"Active Directory Server."
The Active Directory server's domain name.
Usually the User Station can determine the
Active Directory server's host name via its
domain name and DNS. If you select the
following Use Host checkbox, this behavior
is replaced.
Configurable when "Type" is set to
Use Host
"Active Directory Server."
Enable this checkbox when intending to
manually specify the host name or IP
address of the Active Directory server.
The LDAP server's host name or IP address.
Hostname/
IP-Address
Select this checkbox if the security
Use TLS/SSL
connection is required for the LDAP server.
TCP port for the LDAP authentication,
Port
whose default is either of the following:
 389 (standard)
 636 (TLS/SSL)
Configurable when the Use TLS/SSL
Check Server
checkbox is selected.
Certificates
Select this checkbox if it is required to
validate the LDAP server's certificate by the
list of accepted certificates on the User
Station prior to the connection. If the
certificate validation fails, the connection is
refused.
Click this link for installing a CA certificate
Manage
as needed. See
certificates
Certificates
Note: The LDAPS connections, which have the encrypted LDAP
enabled, are NOT using the FIPS accredited cryptographic code.
Certificates Trusted
(see "
" on page 141).