Removing An Installed Certificate - Raritan Dominion KX III User Manual

Chapter 9: Administration Features
142
2. Click Administration > Trusted Certificates, then click the Import
Certificate button
page opens with a list of detected certificates.
3. Click
Station. Certificate files must be one of the following types: PEM,
DER, TXT, CER, or CRT.
4. The content of the installed certificate is displayed.
To show a list of installed certificates, click Back to all

Certificates.
To remove this certificate, click Remove and then OK.

5. If multiple certificates are needed, repeat the same steps to install
more.

Removing an Installed Certificate

If any installed certificate is outdated, invalid or no longer required, you
can remove it.
To remove a certificate from the User Station:
1. Click Administration > Certificates. A list of installed certificates is
displayed.
2. Click the red trash icon for the certificate you want to remove. Or,
click the certificate that you want to remove to check the contents
first, then click Remove.
3. Click OK on the confirmation message.
. The Import Trusted Certificate
to install the desired certificate onto the User