Raritan Dominion KX III User Manual page 137

7. To test whether the connection to the new LDAP server can be
successfully established, type the LDAP user name and password in
the Test Connection section and click Test.
8. Click Save.
9. Repeat the same steps to add more LDAP servers as needed.
Editing or Deleting LDAP Servers
To show a list of existing LDAP servers, click Administration > LDAP.
In the Active column:
indicates that LDAP server is enabled.
•
• indicates that LDAP server is disabled.
To modify an LDAP server setting:
1. Click the desired LDAP server's
Server page opens.
2. Make necessary changes to the information shown. For information
Adding LDAP Servers
on each field, see
3. Click Save.
Chapter 9: Administration Features
button. The Edit LDAP
(on page 120).
127