Chapter 10: Maintenance Features
164
To import backup files:
Make sure the connected USB drive contains backup files in its
directory.
1. Click Maintenance > Backup & Restore. The Backup & Restore page
opens.
2. Click Import Backup. The Import Backup from USB Storage page
opens. All backup files detected on the USB drive are listed.
3. Click the import button of the desired backup file.
The selected file is imported from the connected USB drive, and
shown in the Backup & Restore page.
Deleting Backup Files
It is better to check the creation date of a backup file before removing it.
The creation date is the first 8 digits following the software version
number in the filename. For example, if the filename is:
KX3UST_backup_1.0.0.5.284_20151014090046.dat
Its software version is 1.0.0.5.284, so its date is 20151014, which is
October 14, 2015.
To remove a backup file:
1. To show existing backup files, click Administration > Backup &
Restore.
2. Click the
button of the desired file.
3. Click OK on the confirmation message.
root