Chapter 2 Getting Started; Installation And Configuration; Step 1: Connect The Equipment - Raritan Dominion KX III User Manual

Chapter 2

Installation and Configuration

Getting Started
This chapter introduces the basic installation and configuration.
In This Chapter
Installation and Configuration .................................................................... 12
Basic Network Settings .............................................................................. 21
Logout or Shutdown .................................................................................... 23
VESA Mount (Optional) ................................................................................ 23
Rackmount Using L-type Brackets (Optional) ........................................... 25

Step 1: Connect the Equipment

Only the basic hardware installation is described. For additional
connection information, see
To make a basic connection:
1. Disconnect all devices from power.
2. Connect a USB keyboard and mouse to the front or rear USB 2.0
ports.
3. Optional. Connect a microphone and speakers to the front panel.
4. Connect the User Station to the network using either or both LAN
ports on the rear panel.
5. Connect one or two monitors using either or both DisplayPort ports,
or the HDMI port.
Overview
(on page 2).
12