Chapter 7: Using the KVM Client
Mouse Settings
64
You can operate in either single mouse mode or dual mouse mode.
Single mouse mode displays only one mouse pointer while dual mouse
mode displays two.
In any mouse mode, when the mouse pointer lies within the KVM Client's
target server window, mouse movements and clicks are directly
transmitted to the target server.
Click
to select one mouse command or mode.
Single Mouse Cursor is for single mouse mode. Absolute, Automatic and
Standard are the dual mouse modes.
Important: Make sure you have configured mouse settings on the
target servers properly. For information on configuring mouse
settings of target servers, refer to the KX III KVM switch's user
documentation from its application or the Dominion KX III section of
the Raritan website's
Support page
http://www.raritan.com/support/
(
).