Factory Reset At Startup - Raritan Dominion KX III User Manual

Factory Reset at Startup

3. Enter the password of the user who triggered the screen-locking
mode.
4. Click Unlock.
To log out of the User Station:
1. At the password prompt, click Log Out. NO password is needed.
2. The Login Screen displays, and any user can log in.
In addition to the factory reset feature in the User Station Configuration
window, you can reset the User Station to factory defaults by performing
the factory reset during the device boot.
Only the admin user can perform the factory reset at startup. Note that
the factory reset removes all customized data. See
page 165).
To perform factory reset when the device boots up:
1. Restart or boot up the User Station.
2. When a blinking text cursor displays on the top-left corner of the
screen after the initial BIOS image, press Esc within a second.
3. A menu with the two options below is shown.
Boot KX III User Station

Reset KX III User Station to Factory Defaults

4. Select Reset KX III User Station to Factory Defaults.
To abandon the factory reset, select the other option.

5. When the system prompts you to enter user credentials, type the
admin credentials -- "admin" user and the current admin password.
The default admin password is "raritan"

6. If the admin credentials are correct, the User Station performs the
factory reset and then reboots. If the credentials are incorrect, the
User Station returns back to the menu.
Chapter 12: Additional Features
Factory Reset
(on
199