Logout Or Shutdown; Vesa Mount (Optional) - Raritan Dominion KX III User Manual

Logout or Shutdown

VESA Mount (Optional)

5. If your network supports IPv6, click the IPv6 Settings tab, and repeat
the above step for configuring IPv6 settings. Note that IPv6 provides
the "Ignore" option instead of the "Disabled" option to disable the
IPv6 networking. See
6. For additional settings, click the Ethernet tab. See
Settings
(on page 190).
7. Click OK. The new network settings apply now.
Both logout and shutdown commands are available under Leave in the
Main Menu.
Log Out
: Logs the user out of the User Station.
•
Shut Down
: Provides the following options. Click the one you prefer,
or the User Station will automatically shut down in one minute. For
detailed information, see
Screen Unlocking
"
Restart: Restarts the User Station.
Shut Down: Powers off the User Station. You should always use the
software command as the only method to power off your User
Station.
Tip: An alternative to trigger the shutdown options is to press
Ctrl+Alt+Delete. See Desktop Settings.
Warning: Do NOT turn the User Station off by holding down the Power
button or unplugging the power cord because such operations may
damage the User Station. A short press of the Power button initiates a
graceful shutdown that does not save open KVM sessions.
You can mount the Dominion User Station onto the back of a monitor
with 75 or 100 mm VESA standards.
Below shows the VESA MOUNT kit:
IPv6 Settings
(on page 187).
Device Resume or Screen Unlocking
" on page 198).
Chapter 2: Getting Started
Ethernet
(see
23