Enabling Or Disabling The Ldap Authentication - Raritan Dominion KX III User Manual

Chapter 9: Administration Features
128
To delete an LDAP server:
1. Click the desired server's
2. Click OK on the confirmation message.

Enabling or Disabling the LDAP Authentication

Click Administration > LDAP to open the LDAP Servers page. The
right-most button indicates the current LDAP authentication setting.
When that page shows
is currently disabled, which is the default. While disabled, all users are
authenticated via the local database of the User Station so their user
credentials must be available on the User Station. Therefore, only local
Users
users can log in. See
When that page shows
is currently enabled. While enabled, all users are authenticated via the
LDAP servers so only LDAP users can log in. The only local user that can
admin
log in is the user.
To enable/disable the LDAP authentication:
To enable it, click

To disable it, click

Tip 1: You can also enable or disable the LDAP authentication on the Edit
LDAP Settings page. See
"
Configuring the Maximum Search Results and Local Authentication
" on page 131).
Settings
button.
, the LDAP authentication
(on page 111).
, the LDAP authentication
.
Setting the Maximum Search Results
.
(see