An "active" network connection is highlighted in bold, with a Disconnect
command following it. To disable any active connection, select
Disconnect.
The formatting of that connection's name turns from bold to
normal, indicating that it becomes inactive.
To activate any disabled network connection shown in the list, click it.
The formatting of that connection's name turns from normal to
bold, indicating that it becomes active.
Right-clicking the icon:
A shortcut menu with these commands displays.
Enable Networking
•
The default is to enable it.
Connection Information
•
information of the User Station, including IPv4 and IPv6 addresses.
When only one network connection is active, this dialog shows
one tab.
When both network connections are active, this dialog shows two
tabs.
The default connection has the word "default" shown on its tab.
Edit Connections
•
: This triggers the Network Connections dialog. See
Network Connections
Clock Icon
: Enables or disables the networking capability.
: This command shows the networking
(on page 181).
Chapter 11: System Settings
193