Raritan Dominion KX III User Manual page 140

Chapter 9: Administration Features
130
2. In the Server field, select the desired LDAP server from the list of
active
LDAP servers.
3. The following settings on this page are pre-populated with the values
of the selected LDAP server, but you can adjust them to match your
search needs. If If you are not familiar with the LDAP settings,
consult your LDAP administrator for help.
Setting Description
One or two options are available, depending
Search
on the selected LDAP server's
Credentials
configuration.
 stored admin credentials: Use the admin
 specify below: Use the search
With "specify below" selected, you must
Bind DN,
specify the search credentials in the two
fields.
Password
The type of user data to search - Users or
Type
Groups.
Distinguished Name (DN) of the search
Base DN
base, which is the starting point of the LDAP
search.
Search criteria for finding LDAP user
Search Filter
objects within the directory tree.
The depth to search for LDAP user or group
Search Scope
objects, which starts at the directory level
denoted by the "Base DN."
 Base: Searches the base DN only.
 One: Searches one level below the base
 Subtree: Searches all levels below the
4. Click Search.
5. From the search result, you can select desired LDAP users or
groups and add them to the User Station by clicking the buttons
below.
Add as local user

credentials stored in the LDAP server's
configuration.
credentials specified in the following two
fields.
DN, with the base excluded.
base DN, including the base.
: