Chapter 4 Managing Targets And Access Methods - Raritan Dominion KX III User Manual

Chapter 4 Managing Targets and Access
Methods
Targets and Access methods are managed in the User Station
User Station Configuration
Configuration window. See (on page 27).
The Targets and Access methods feature offers different ways to view,
manage, and connect to targets, using KVM port access, as well as RDP,
SSH, and VNC. You can configure these additional access methods for
any KVM target. You can also configure access methods to reach a
non-KVM target device or system that is directly connected to your
network. These targets can be any device or system that can be remotely
accessed by Dominion User Station, such as a server, network switch,
HVAC or other.
When a KVM switch is added, Dominion User Station automatically
detects ports and creates a Target with a KVM access method for each
port. The Targets section of the User Station Configuration and the Ports
Navigator populates with this information. This gives you an alternative
view of the KVM ports of your managed KVM switches, which are still
available to view and access under the Devices section of the Port
Navigator. KVM access cannot be added manually--it is always based on
access to KVM switches you have added to Dominion User Station.
You can add other targets and access methods manually to use RDP,
SSH and VNC access.
Note: If you're working in CC-SG mode, your user experience is different.
See (on page 138).
Navigator with CC-SG Integration
In This Chapter
Adding Targets and Access Methods ......................................................... 41
Editing and Deleting Targets and Access Methods ................................... 43
Known Limitations on Targets ................................................................... 44
40