Raritan Dominion KX III User Manual page 77

Automatic Mouse Mode
In this mode, the target server's mouse settings are detected and the
mouse cursors synchronized accordingly, allowing mouse acceleration
on the target server.
This mode is the default for non-VM target servers.
Note: A non-VM target server is the target server using a CIM that does
not support virtual media.
To enter the Automatic mouse mode:
Click > Automatic.
•
Automatic mouse synchronization requirements:
The Synchronize Mouse command automatically synchronizes mouse
cursors during moments of inactivity in the Automatic mouse mode.
Synchronize Mouse
See
For this to work properly, the following conditions must be met:
No windows should appear in the top-left corner of the target

server's page.
There should not be an animated background in the top-left

corner of the target server's page.
The target server's mouse cursor shape should be normal and

not animated.
The target server's mouse speeds should not be set to very slow

or very high values.
Advanced mouse properties such as "Enhanced pointer

precision" or "Snap mouse to default button in dialogs" should
be disabled on the target servers.
Choose "Best Possible Video Mode" in the Video Settings dialog

of the KVM Client.
The edges of the target server's video should be clearly visible

(that is, a black border should be visible between the target
server's desktop and the KVM Client window when you scroll to
an edge of the target video image).
After autosensing the target server's video, manually perform the
Synchronize Mouse command. This also applies when the resolution
of the target server changes if the mouse cursors start to desync
from each other.
If automatic mouse synchronization fails, this mode will revert to
standard mouse synchronization behavior. See
Mode
(on page 68).
Chapter 7: Using the KVM Client
(on page 65).
Standard Mouse
67