Raritan Dominion KX III User Manual page 195

Setting
Routes
Note: You can retrieve current IP addresses from the Connection
Information dialog. See
Automatic (DHCP) addresses only:
The DHCP server in the network automatically assigns an IPv4
address to the User Station, but no DNS servers or domain servers
are specified.
The following settings are configurable for this method.
Setting
DNS servers
Search domains
DHCP client ID
Require IPv4
addressing for this
connection to
complete
Description
Optional.
Configure the IPv4 routing for this User
Station.
 Click Add to add one or multiple routing
addresses for the User Station to reach
in the network.
 To remove any existing routes, select it
and click Delete.
Ignore automatically obtained routes

Select this checkbox only when you
want to use manually-specified routes.
Use this connection only for resources

on its network
:
If selected, this connection will be used
only when retrieving resources from the
network. It will never be used as the
default network connection.
(on page 192).
Network Icon
Description
Specify IP addresses of one or multiple DNS
servers.
Use commas to separate multiple servers.
Specify IP addresses of one or multiple
domains for resolving host names.
Use commas to separate multiple domains.
See the above table for information of these
fields/options.
Chapter 11: System Settings
:
185