Raritan Dominion KX III User Manual page 96

Chapter 7: Using the KVM Client
86
Emulating the Card Reinsertion
If the authentication on the target server fails while the card is being
properly inserted into the card reader, you can attempt to solve the issue
by removing and reinserting the card.
The User Station is able to emulate the card reinsertion without
physically removing and reinserting the card.
To emulate the card removal and reinsertion:
1. Click to open the "Audio, Mass Storage and SmartCard
Devices" dialog.
2. Click
Card Reinsertion Scenarios
The card is not detected in one of the following scenarios, you must
reinsert the card or emulate the card reinsertion to solve the issue.
The scenario where you must physically remove and reinsert the
card:
a. The smart card reader with a card inserted is physically connected to
the User Station and is configured to automatically connected to a
specific target server at startup.
b. You establish and close the connections to that target server for
several times.
c. When the card is no longer detected, PHYSICALLY remove and
reinsert the card.
The scenario where you need to emulate the card reinsertion:
a. Both the smart card reader and audio device are configured to
automatically connected to a specific target server at startup.
.