Raritan Dominion KX III User Manual page 85

Section Description
•
Connect New
Device
Click this button to virtually connect an
audio device to the target server.
See
•
Click this button to mount a USB drive
onto the target server.
•
This button mounts a DVD drive,
CD-ROM drive, or an ISO image onto
the target server.
See
•
This button connects a smart card
reader to the target server.
See
Connected This section lists all devices which
Devices have been "virtually" connected to the
target server.
See
(on page 87).
USB Profiles Click it to select a USB configuration
profile that best applies to the target
server. See
Note: For detailed information of each USB profile, see the section titled
"Available USB Profiles" in the KX III KVM switch's user documentation,
which is accessible from the KVM switch application or the Raritan
website's
Support page
Audio Device ...
Audio Device
(on page 76).
Mass Storage Device ...
CD-ROM Device / ISO File ...
Virtual Media
(on page 78).
SmartCard Reader...
SmartCard Reader
(on page 83).
Disconnecting a Virtual Device
USB Profiles
(on page 88).
(
http://www.raritan.com/support/
Chapter 7: Using the KVM Client
).
75