Using Remote Control - Raritan Dominion KX III User Manual

Chapter 9: Administration Features

Using Remote Control

One common use case for remote control is to connect the controlled
user station to a wall monitor and remotely control the display of various
target servers on monitor via web browser.
Using a web browser, connect to the Remote Control interface of the
Dominion User Station using the IP address or hostname as the URL.
Login as usual. Upon successful login, the Dominion User Station
presents the Port Navigator just as it appears in the local console.
Selecting and opening ports works the same as in the local console, but
the KVM clients open in full screen mode at the Dominion User Station
that is being remotely controlled.
153