Backup And Restore - Raritan Dominion KX III User Manual

Backup and Restore

Archive File Storage
The amount of storage to keep Event Log archives inside Dominion User
Station is limited. If no more storage is available, you will see an error
message upon attempting to create a new archive.
The error message prompts you to delete old archive files.
You can export files to external storage before deleting, if needed. See
Exporting Archive Files
You must delete archive files before you can create the new archive. See
Deleting Archive Files
If the storage is full when an automatic archive must be created, the
oldest archives are automatically deleted until there is enough space to
write the new archive.
Deletion of each archive is logged into the Event Log
The User Station allows you to back up the latest settings and data with
one click. By default, the backup files are stored in the User Station.
In case you have to restore to the previous settings and data, select the
backup file you need and perform the restore command.
Note that the following system settings are NOT stored in the backup file
so they CANNOT be restored.
Network Connections
• Network, see
Date/Time
Date/Time, see
•
Event Log Archives
•
• Backup Files
Tip: You can export or import backup files from a USB flash drive. See
Exporting and Importing Backup Files
To back up the current settings and data:
1. If not displayed, launch the User Station Configuration window. See
User Station Configuration
Chapter 10: Maintenance Features
(on page 159).
(on page 160).
(on page 181)
(on page 171)
(on page 163).
(on page 27).
161