Scanner Options - Raritan Dominion KX III User Manual

Chapter 6: Port Scanner

Scanner Options

56
The thumbnail preview shows all included ports. Choose vertical or
horizontal placement in the scanner options.
The currently displayed port is highlighted in the thumbnails
preview. Click the thumbnail once to view the port in the scanner.
Double-click the thumbnail to open a KVM session to the port. Note that
the default action of a double-click can be configured in Launch Settings.
KVM Client Settings
See
Right-click a thumbnail to open a pop-up menu with more options:
• Open in new KVM client: launch a KVM session to the port in a new
window.
Open in current KVM client: launch a KVM session to the port in the
•
currrent window.
Continue Scan with port "port name": Start scanning the selected
•
port.
• Remove from scanner: Turns off the "Include in Port Scanner"
setting for the port.
Temporarily Remove from Scanner: The port is removed from this
•
scanner session, but it is included the next time the scanner is
started.
The port scanner can be configured to set intervals and delays,
thumbnail orientation, and pause behavior.
To set scanner options:
1. In the Main Menu, click Port Scanner to open the port scanning
window.
2. Click the Scan Settings icon to open the options.
3. Configure intervals and delays:
a. Port Display Interval: Select the number of seconds to display
each port before switching to next
b. Interval between Ports: Select the number of seconds to pause
after Port Display Interval ends.
4. Configure settings:
a. Thumbnails orientation: Select Vertical or Horizontal to position
thumbnails in relation to scan window.
b. Select the Pause Scanner when opening KVM Sessions checkbox
if the scanning should stop when you open a port into a full KVM
session.
(on page 97)