Adding KVM Switches
When the Targets option is selected, view the list of Targets here,
and click a Target to show its access methods and details.
All KX III KVM switches added to this User Station can be seen by all
users who log in to this User Station although they can only access those
switches if they have provided proper user credentials. If users, KX III
devices, and the Dominion User Station exist in the same LDAP
environment, you can add your KVM switches with single sign-on
capability.
Note: To add a KX device that is under CC-SG management, make sure
"Allow direct access" is checked for the device in CC-SG, then add the KX
device to Dominion User Station using an admin-level account that is
different from the one used to authenticate the device on CC-SG. Or, you
can use CC-SG integration. See
"
CommandCenter Secure Gateway (CC-SG) Integration
To add a KVM switch:
1. Click New in the User Station Configuration window. See
Station Configuration
Chapter 3: Managing KVM Switches and Ports
CC-SG Integration
(on page 27).
(see
" on page 134)
User
29