Raritan Dominion KX III User Manual page 25

Type the KVM switch's IPv4/IPv6 address or
hostname in this field.
Select the authentication method.
 Normal: You must enter login credentials for the
 Allow LDAP single sign-on: When users, KVM
User credentials on the KVM switch are required for
querying this KVM switch's port information.
The user credentials may or may not be the same as
your user credentials for the User Station. See
Authentication of User Stations and KVM Switches
(on page 202).
Note: If you enter incorrect user credentials for a KVM switch, you
may be blocked if User Blocking has been enabled on that KVM
switch and too many incorrect attempts are made. When this occurs,
contact the KVM switch's system administrator for help.
4. Click Add KX Device
5. Click Back to All KX Devices to go back to the list page. Repeat to add
more devices.
Important: If "Allow LDAP Single Sign-on" is enabled, LDAP users
can omit entering credentials in favor of their LDAP credentials
being used. Otherwise, user credentials for a KVM switch are saved
on a per-user basis. Other users must enter and save their own user
credentials for the KVM switches you added. See
Switches
(on page 31).
KVM switch.
switches, and the Dominion User Station have the
same LDAP environment, single sign-on can be
used.
to save your data.
Chapter 2: Getting Started
Editing KVM
15