Raritan Dominion KX III User Manual page 129

User names for this LDAP authentication mode are NOT needed

on the User Station.
LDAP alias, which allows one user to have multiple logins, such as
multiple common names, does NOT work in the LDAP authentication
and authorization mode.
Only authentication via LDAP:
a. On the LDAP server(s), create users for the User Station.
User groups are NOT needed on the LDAP server(s).

b. On the User Station, create both USERS AND USER GROUPS. The
user names must be the same as those on the LDAP server(s), but
the user passwords are not stored on the User Station. See
User Groups
(on page 111) and
You can also import desired user names from the LDAP server

into the User Station after performing an LDAP search for user
Searching for LDAP Users and Groups
objects. See
129).
LDAP alias works fine in the LDAP authentication only mode.
User Station configuration required for either LDAP
authentication mode:
Add the LDAP server(s). See
•
Enable the LDAP authentication. See
•
LDAP Authentication
Search Results
(see "
and Local Authentication Settings
TIP: When "admin" is entered as the username and LDAP is enabled, an
additional checkbox "Authenticate Locally" appears on the login page.
You can select Authenticate Locally to authenticate using User Station's
local database instead of the LDAP server(s) regardless of the LDAP
authentication mode.
Chapter 9: Administration Features
(on page 114).
Adding LDAP Servers
Enabling or Disabling the
Setting the Maximum
(on page 128) or
Configuring the Maximum Search Results
" on page 131).
Users
(on page
(on page 120).
119