Chapter 7: Using the KVM Client
88
Existing virtual devices are listed in the Connected Devices section.
The devices that you can no longer mount onto the target server are
disabled. Hover your mouse for a tooltip showing reasons.
3. Click the Disconnect button for the device you want to disconnect.
Click the Unmount button if you are disconnecting the smart card
reader.
4. Click Yes on the confirmation message.
USB Profiles
Usually the "Generic" USB profile works fine for most target servers. In
case any of your target servers requires a special USB profile to have the
remote audio devices, virtual media and card reader work properly,
select a different USB profile for it.
To apply an appropriate USB profile to the target server:
1. Click
to open the "Audio, Mass Storage and SmartCard
Devices" dialog.