2. Click the "Audio Device ..." button. The Connect Audio Device dialog
appears.
Checkbox
Description
Connect Playback
To manually connect an available audio
Device (Speaker /
playback device to the target server,
Headphones)
select this checkbox.
Set the playback audio format in the
Automatically Connect at Startup:
Connect Capture
To manually connect an available audio
Device
recording device to the target server,
(Microphone)
select this checkbox.
Set the recorded audio format in
Automatically Connect at Startup:
3. Click OK.
To disconnect the audio device from the target server:
Disconnecting a Virtual Device
•
See
Audio Format field.
The selected playback device will
automatically be connected to the
current target server whenever that
target is accessed.
the Audio Format field.
The selected microphone will
automatically be connected to the
current target server whenever that
target is accessed.
(on page 87).
Chapter 7: Using the KVM Client
77