Chapter 7: Using the KVM Client
84
Mounting a Card Reader
You can physically connect multiple smart card readers to the User
Station, but only one smart card reader can be virtually mounted onto a
target server at a time.
To mount a smart card reader:
supported
1. Make sure a
connected to the User Station.
2. Click
to open the "Audio, Mass Storage and SmartCard
Devices" dialog.
3. Click the "SmartCard Reader ..." button. The Connect SmartCard
Reader dialog appears.
If this button is disabled, it may be impacted by the KX III KVM
switch's settings. See
III KVM Switch Settings
4. Select the desired card reader from the list shown in the dialog.
To automatically connect the selected card reader to the current
target server whenever that target server is accessed, select the
"Automatically connect selected Reader at Startup" checkbox.
5. Click OK to connect it.
smart card reader has been physically
Card Reader Restriction Caused by KX
(on page 207).