Network Connections - Raritan Dominion KX III User Manual

Network Connections

You can connect the two LAN ports of the User Station to the same or
diverse subnets.
If you have connected both LAN ports to the network(s) when turning on
or restarting the User Station, the User Station
the network connections as the default one. However, if you change the
network settings of either or both connections, the "final" one that is
changed will automatically become the default connection.
Note: You can identify the default connection in the Connection
Information dialog. See
By default, both IPv4 and IPv6 addressing are enabled for both LAN ports,
and the following are the default network settings:
Automatic (DHCP)
• IPv4:
Automatic
IPv6:
•
You can also set additional ethernet options, such as MTU and Wake on
Ethernet Settings
LAN: See
To change network settings:
1. Choose Main Menu > System Settings > Network. The Network
Connections dialog appears, with two factory default connections
listed for two LAN ports.
Ethernet 1
is for LAN port 1, and

(on page 192).
Network Icon
(on page 190).
Ethernet 2
Chapter 11: System Settings
randomly
selects one of
is for the other.
181