Editing Kvm Switches - Raritan Dominion KX III User Manual

Editing KVM Switches

Added KVM switches are listed in the User Station Configuration window.
Each KVM switch has three icons in the Actions column. You must have
Device Administration privileges to delete, edit or add KVM switches.
If you are not the one who added new KVM switches to the User Station,
you must follow the procedure below to enter user credentials for
newly-added KVM switches.
Note: For the difference between a KVM switch's and the User Station's
user credentials, see
Authentication of User Stations and KVM
(on page 202).
Switches
To view the KVM switch's ports:
Click the desired KVM switch. The ports list opens. See
•
KVM Ports
(on page 35).
To change the KVM switch's IP address/host name or
authentication method:
1. Click the desired KVM switch's
2. Click Edit to open the Edit KX Device page.
3. Modify the IP address or host name, or change the authentication
Adding KVM Switches
method. See
4. Click Save.
To enter new user credentials for a KVM switch:
1. Click the button of the desired KVM switch.
2. Enter new user credentials.
3. Click Save.
Note: If you enter incorrect user credentials for a KVM switch, you may
be blocked if User Blocking has been enabled on that KVM switch and too
many incorrect attempts are made. When this occurs, contact the KVM
switch's system administrator for help.
Chapter 3: Managing KVM Switches and Ports
button.
(on page 29).
Configuring
31